 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| N5230A 300 khz to 6, 13.5 ghz 10 mhz to 20, 40, 50 ghz data sheet note: specification information in this document is also available within the pna-l network analyzers internal help system. agilent 2-port pna-l microwave network analyzer please note: this document does not contain agilents most up-to-date pna-l network analyzer portfolio. this document is available for reference only for customers using agilents legacy network analyzers. to view the current agilent 2-port pna-l microwave network analyzer data sheet click here .
2 table of contents definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 corrected system performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 table 1. system dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 table 2. extended dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 N5230A corrected system performance with 3.5mm connectors . . . . . . . . 6 table 3. 85052b calibration kit N5230A C configuration test set and extended power range (option 025 or 125) . . 6 table 4. 85052b calibration kit N5230A C configuration test set and extended power range (option 225) . . . . . 8 table 5. n4691a electronic calibration module N5230A C configuration test set and extended power range (option 225) . . . . 10 table 6. 85056a calibration kit N5230A C configuration test set and extended power range (option 425 or 525) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 table 7. n4693a electronic calibration module N5230A C configuration test set and extended power range (option 425 or 525) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 N5230A corrected system performance with type-n connectors . . . . . . 16 table 8. n5232b calibration kit N5230A C configuration test set and extended power range (option 025) . . . . 16 table 9. uncorrected system performance . . . . . . . . . . . . . . . . . . . . . . . . 18 table 10. test port output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 table 11. test port input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 dynamic accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 table 12. test port input (group delay) . . . . . . . . . . . . . . . . . . . . . . . . . . 25 general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 table 13. miscellaneous information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 table 14. front panel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 table 15. rear panel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 table 16. analyzer environment and dimensions . . . . . . . . . . . . . . . . . . 28 measurement throughput summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 table 17. typical cycle time (ms) for measurement completion . . . . . . 29 table 18. cycle time vs if bandwidth (options 020, 025, 120, 125) . . . 30 table 19. cycle time vs if bandwidth (options 220, 225, 420, 425) . . . 31 table 20. cy cle time vs number of points (options 020, 025, 120, 125) . . 32 table 21. cy cle time vs number of points (options 220, 225,420, 425, 520, 525) . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 table 22. data transfer time (ms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 specifications: front-panel jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 table 23: measurement receiver inputs (rcvr a in, rcvr b in) . . . . . . . 35 table 24: reference receiver inputs (rcvr r1, rcvr r2) . . . . . . . . . . . . . 36 table 25: reference outputs (reference 1 source out, reference 2 source out) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 table 26: source outputs (port 1 source out, port 2 source out) . . . . . 37 table 27: coupler inputs (port 1 cplr thru, port 2 cplr thru) . . . . . . . 37 table 28: coupler outputs (port 1 cplr arm, port 2 cplr arm) . . . . . . 37 test set block diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 N5230A option 220, or 420, or 520 (standard test set and standard power range) network analyzer . . . 38 N5230A option 225, or 425, or 525 (configurable test set and extended power range) network analyzer . . 38 web resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 3 this is a subset of technical specifications for the N5230A network analyzer. to view or print the N5230A technical specifications, visit our web site at www.agilent.com/find/pnal this N5230A document provides technical specifications for the following calibration kits and ecal modules only: 85052b, 85056a, 85032b, n4691a, and n4693a. please download our free uncertainty calculator from www.agilent.com/find/na_calculator to generate the curves for your calibration kit and pna setup. definitions all specifications and characteristics apply over a 25 c 5 c range (unless otherwise stated) and 90 minutes after the instrument has been turned on. specification (spec.): warranted performance. specifications include guardbands to account for the expected statistical performance distribution, measurement uncertainties, and changes in performance due to environmental conditions. characteristic (char.): a performance parameter that the product is expected to meet before it leaves the factory, but that is not verified in the field and is not covered by the product warranty. a characteristic includes the same guardbands as a specification. typical (typ.): expected performance of an average unit which does not include guardbands. it is not covered by the product warranty. nominal (nom.): a general, descriptive term that does not imply a level of performance. it is not covered by the product warranty. calibration: the process of measuring known standards to characterize a network analyzer's systematic (repeatable) errors. corrected (residual): indicates performance after error correction (calibration). it is determined by the quality of calibration standards and how well "known" they are, plus system repeatability, stability, and noise. uncorrected (raw): indicates instrument performance without error correction. the uncorrected performance affects the stability of a calibration. standard: when referring to the analyzer, this includes no options unless noted otherwise. 4 corrected system performance the specifications in this section apply for measurements made with the N5230A analyzer with the following conditions: ? 10 hz if bandwidth ? no averaging applied to data ? isolation calibration with an averaging factor of 8 table 1. system dynamic range 1 standard configuration and standard power range description specification (db) typical (db) at test port at test port option option option option option option option option 020, 120 220 420 520 020, 120 220 420 520 300 khz to 3 mhz 3 93 4 3 to 10 mhz 113 10 to 45 mhz 122 103 89 89 45 to 70 mhz 2 122 101 90 90 70 to 500 mhz 2 122 105 90 90 500 mhz to 2 ghz 122 110 110 110 2 to 6 ghz 122 110 110 110 6 to 8 ghz 120 110 110 110 8 to 9 ghz 120 110 100 100 9 to 10.5 ghz 116 110 100 100 10.5 to 12.5 ghz 111 110 100 100 12.5 to 13.5 ghz 109 108 100 100 13.5 to 20 ghz 108 100 100 20 to 31.25 ghz 95 95 31.25 to 40 ghz 90 90 40 to 50 ghz 79 configurable test set and extended power range description specification (db) typical (db) at test port at test port option option option option option option option option 025, 125 225 425 525 025, 125 225 425 525 300 khz to 3 mhz 3 92 4 3 to 10 mhz 112 10 to 45 mhz 121 103 88 88 45 to 70 mhz 2 121 101 90 90 70 to 500 mhz 2 121 105 90 90 500 mhz to 2 ghz 121 110 110 110 2 to 6 ghz 121 110 110 110 6 to 8 ghz 120 110 110 110 8 to 9 ghz 120 110 100 100 9 to 10.5 ghz 116 110 100 100 10.5 to 12.5 ghz 111 110 100 100 12.5 to 13.5 ghz 108 108 100 100 13.5 to 20 ghz 108 100 100 20 to 31.25 ghz 92 92 31.25 to 40 ghz 87 87 40 to 50 ghz 75 1. the system dynamic range is calculated as the difference between the noise floor and the specified source maximum output power. the effective dynamic range must take measurement uncertainties and interfering signals into account. 2. may be degraded by 10 db at particular frequencies (multiples of 5 mhz) below 500 mhz due to spurious receiver residuals. methods are available to regain the full dynamic range. 3. may be limited by crosstalk at certain frequencies below 3 mhz. 4. value and frequency band changed july 2006. 5 table 2. extended dynamic range 1 configurable test set and extended power range specification (db) at typical (db) at description direct receiver direct receiver access input access input option option option option option option option option 025, 125 225 425 525 025, 125 225 425 525 300 khz to 3 mhz 3 108 4 3 to 10 mhz 128 10 to 45 mhz 137 115 109 109 45 to 70 mhz 2 137 113 111 111 70 to 500 mhz 2 137 117 111 111 500 mhz to 2 ghz 137 122 122 122 2 to 6 ghz 137 122 122 122 6 to 8 ghz 136 122 122 122 8 to 9 ghz 136 122 122 122 9 to 10.5 ghz 132 122 112 112 10.5 to 12.5 ghz 127 122 112 112 12.5 to 13.5 ghz 124 120 112 112 13.5 to 20 ghz 120 112 112 20 to 31.25 ghz 103 103 31.25 to 40 ghz 98 98 40 to 50 ghz 83 1. the direct receiver access input extended dynamic range is calculated as the difference between the direct receiver access input noise floor and the source maximum output power. the effective dynamic range must take measurement uncertainties and interfering signals into account. this set-up should only be used when the receiver input will never exceed its compression or damage level. when the analyzer is in segment sweep mode, it can have predefined frequency segments which will output a higher power level when the extended dynamic range is required (i.e. devices with high insertion loss), and reduced power when receiver compression or damage may occur (i.e. devices with low insertion loss). the extended range is only available in one-path transmission measurements. 2. may be degraded by 10 db at particular frequencies (multiples of 5 mhz) below 500 mhz due to spurious receiver residuals. methods are available to regain the full dynamic range. 3. may be limited by crosstalk at certain frequencies below 3 mhz. 4. value and frequency band changed july 2006. 6 N5230A corrected system performance with 3.5 mm connectors table 3. 85052b calibration kit N5230A C configurable test set and extended power range (option 025, 125) configurable test set, extended power range applies to the N5230A option 025.125 analyzers, 85052b (3.5 mm) calibration kit, 85131f flexible test port cable set, and a full 2-port calibration. also applies to the following condition: environmental temperature 23 3 c, with < 1 c deviation from calibration temperature. specification (db) description 300 khz to 10 mhz to 2 to 8 to 10 mhz 2 ghz 8 ghz 13.5 ghz directivity 48 48 44 44 source match 40 40 33 31 load match 48 48 44 44 reflection tracking 0.003 0.003 0.003 0.006 (+0.02/c) (+0.02/c) (+0.03/c) (+0.03/c) transmission tracking 0.017 0.015 0.075 0.131 (+0.02/c) (+0.02/c) (+0.03/c) (+0.03/c) transmission uncertainty (specifications) magnitude 0.01 0.1 1 10 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (db) N5230A 025/125 full two port cal using 85052b 300 khz to 10 mhz 10 mhz to 2 ghz 2 to 8 ghz 8 to 13.5 ghz s11 = s22 = 0 source power = 0 dbm phase 0.1 1 10 100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (degrees) N5230A 025/125 full two port cal using 85052b s11 = s22 = 0 source power = 0 dbm 300 khz to 10 mhz 10 mhz to 2 ghz 2 to 8 ghz 8 to 13.5 ghz 7 reflection uncertainty (specifications) magnitude 0 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (linear) N5230A 025/125 with 85052b s21 = s12 = 0 source power = 0 dbm 300 khz to 10 mhz 10 mhz to 2 ghz 2 to 8 ghz 8 to 13.5 ghz phase 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (deg) N5230A 025/125 with 85052b s21 = s12 = 0 source power = 0 dbm 300 khz to 10 mhz 10 mhz to 2 ghz 2 to 8 ghz 8 to 13.5 ghz 8 magnitude 0.01 0.1 1 10 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (db) N5230A 225 full two port cal using 85052b s11 = s22 = 0 source power = -5 dbm 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz phase 0.1 1 10 100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (degrees) N5230A 225 full two port cal using 85052b s11 = s22 = 0 source power = -5 dbm 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz uncertainty (db) N5230A corrected system performance with 3.5 mm connectors table 4. 85052b calibration kit N5230A C configurable test set and extended power range (option 225) configurable test set, extended power range applies to the N5230A option 225 analyzers, 85052b (3.5mm) calibration kit, 85131f flexible test port cable set, and a full 2-port calibration. also applies to the following condition: environmental temperature 23 3 c, with < 1 c deviation from calibration temperature. specification (db) description 45 to 500 mhz to 2 to 8 to 500 mhz 2 ghz 8 ghz 20 ghz directivity 48 48 44 44 source match 40 40 33 31 load match 48 48 44 44 reflection tracking 0.003 0.003 0.003 0.006 (+0.02/c) (+0.02/c) (+0.03/c) (+0.03/c) transmission tracking 0.010 0.014 0.062 0.104 (+0.02/c) (+0.02/c) (+0.03/c) (+0.03/c) transmission uncertainty (specifications) 9 n4691a electronic calibration module N5230A C configurable test set and extended power range (option 225) reflection uncertainty (specifications) magnitude reflection coefficient (linear) N5230A option 225 with 85052b uncertainty (linear) 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz phase reflection coefficient (linear) N5230A option 225 with 85052b uncertainty (deg) 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz 10 N5230A corrected system performance with 3.5 mm connectors table 5. n4691b electronic calibration module N5230A C configurable test set and extended power range (option 225) configurable test set, extended power range applies to the N5230A option 225 analyzers, n4691b electronic calibration module, 85131f flexible test port cable set, and a full 2-port calibration. also applies to the following condition: environmental temperature 23 3 c, with < 1 c deviation from calibration temperature. specification (db) description 45 to 500 mhz to 2 to 8 to 500 mhz 2 ghz 8 ghz 20 ghz directivity 46 56 54 48 source match 41 47 45 44 load match 41 47 44 42 reflection tracking 0.050 0.020 0.030 0.040 (+0.02/c) (+0.02/c) (+0.03/c) (+0.03/c) transmission tracking 0.053 0.021 0.034 0.052 (+0.02/c) (+0.02/c) (+0.03/c) (+0.03/c) transmission uncertainty (specifications) magnitude 0.01 0.1 1 10 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (db) N5230A 225 full two port cal using n4691b 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz s11 = s22 = 0 source power = -5 dbm phase 0.1 1 10 100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncetainty (degrees) N5230A 225 full two port cal using n4691b s11 = s22 = 0 source power = -5 dbm 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz 11 n4691a electronic calibration module N5230A C configurable test set and extended power range (option 225) reflection uncertainty (specifications) magnitude 0 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (linear) N5230A 225 with n4691b s21 = s12 = 0 source power = -5 dbm 45 to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz phase 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncetainty (deg) N5230A 225 with n4691b s21 = s12 = 0 source power = -5 dbm 45 mhz to 500 mhz 500 mhz to 2 ghz 2 to 8 ghz 8 to 20 ghz 12 N5230A corrected system performance with 2.4 mm connectors table 6. 85056a calibration kit N5230A C configurable test set and extended power range (option 425 or 525) configurable test set, extended power range applies to the N5230A option 425 or 525 analyzers, 85056a (2.4 mm) electronic calibration module, 85133f flexible test port cable set, and a full 2-port calibration. also applies to the following condition: environmental temperature 23 3 c, with < 1 c deviation from calibration temperature. specification (db) description 45 mhz to 2 to 20 to 40 to 2 ghz 20 ghz 40 ghz 50 ghz directivity 42 42 38 36 source match 41 38 33 31 load match 42 42 37 35 reflection tracking 0.001 0.008 0.020 0.027 (+0.02/c) (+0.02/c) (+0.02/c) (+0.03/c) transmission tracking 0.019 0.057 0.124 0.211 (+0.02/c) (+0.02/c) (+0.02/c) (+0.03/c) transmission uncertainty (specifications) magnitude 0.01 0.1 1 10 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) N5230A 425 & 525 full two port cal using 85056a 45 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz s11 = s22 = 0 source power = -15 dbm uncertainty (db) phase 0.1 1 10 100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) N5230A 425 & 525 full two port cal using 85056a 45 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz s11 = s22 = 0 source power = -15 dbm uncertainty (degrees) 13 reflection uncertainty (specifications) magnitude 0 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) N5230A 425 & 525 with 85056a 45 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz s21 = s12 = 0 source power = -15 dbm uncertainty (linear) phase 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) N5230A 425 & 525 with 85056a 45 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz s21 = s12 = 0 source power = -15 dbm uncertainty (deg) 14 table 7. n4693a electronic calibration module N5230A C configurable test set and extended power range (option 425 or 525) configurable test set, extended power range applies to the N5230A option 425 or 525 analyzers, n4693a (2.4 mm) electronic calibration module, 85133f flexible test port cable set, and a full 2-port calibration. also applies to the following condition: environmental temperature 23 3 c, with < 1 c deviation from calibration temperature typical (db) specification (db) description 10 to 200 mhz to 2 to 20 to 40 to 200 mhz 2 ghz 20 ghz 40 ghz 50 ghz directivity 32 55 49 43 41 source match 25 46 42 35 30 load match 24 43 41 37 36 reflection tracking 0.05 0.030 0.040 0.060 0.080 (+0.02/c) (+0.02/c) (+0.02/c) (+0.02/c) (+0.03/c) transmission tracking 0.10 0.056 0.078 0.107 0.130 (+0.02/c) (+0.02/c) (+0.02/c) (+0.02/c) (+0.03/c) transmission uncertainty (specifications) magnitude 0.01 0.1 1 10 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (db) N5230A 425 & 525 full two port cal using n4693a 200 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz s11 = s22 = 0 source power = -15 dbm phase 0.1 1 10 100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (degrees) N5230A 425 & 525 full two port cal using n4693a s11 = s22 = 0 source power = -15 dbm 200 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz 15 reflection uncertainty (specifications) magnitude 0 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (linear) N5230A 425 & 525 with n4693a 200 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz s21 = s12 = 0 source power = -15 dbm phase 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (deg) N5230A 425 & 525 with n4693a s21 = s12 = 0 source power = -15 dbm 200 mhz to 2 ghz 2 to 20 ghz 20 to 40 ghz 40 to 50 ghz 16 N5230A corrected system performance with type-n connectors table 8. 85032b calibration kit N5230A C configurable test set and extended power range (option 025) configurable test set, extended power range applies to the N5230A option 025 analyzers, 85032b (type-n) calibration kit, 85132f flexible test port cable set with 85130c adapter set, and a full 2-port calibration. also applies to the following condition: environmental temperature 23 3 c, with < 1 c deviation from calibration temperature. specification (db) description 300 khz to 1 to 10 to 45 mhz to 1 mhz 10 mhz 45 mhz 6 ghz directivity 50 50 47 40 source match 42 42 37 31 load match 50 50 47 38 reflection tracking 0.009 0.009 0.019 0.069 (+0.01/c) (+0.01/c) (+0.01/c) (+0.02/c) transmission tracking 0.013 0.007 0.021 0.101 (+0.01/c) (+0.01/c) (+0.01/c) (+0.02/c) transmission uncertainty (specifications) magnitude 0.01 0.1 1 10 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (db) N5230A 025 full two port cal using 85032b 300 khz to 10 mhz 10 to 500 mhz 500 mhz to 2 ghz 2 to 6 ghz s11 = s22 = 0 source power = 0 dbm phase 0.1 1 10 100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 transmission coef?cient (db) uncertainty (degrees) N5230A 025 full two port cal using 85032b s11 = s22 = 0 source power = 0 dbm 300 khz to 10 mhz 10 to 500 mhz 500 mhz to 2 ghz 2 to 6 ghz 17 transmission uncertainty (specifications) magnitude 0 0.01 0.02 0.03 0.04 0.05 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (linear) N5230A 025 with 85032b s21 = s12 = 0 source power = 0 dbm 300 khz to 10 mhz 10 to 500 mhz 500 mhz to 2 ghz 2 to 6 ghz phase 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1 re?ection coef?cient (linear) uncertainty (deg) N5230A 025 with 85032b s21 = s12 = 0 source power = 0 dbm 300 khz to 10 mhz 10 to 500 mhz 500 mhz to 2 ghz 2 to 6 ghz 18 table 9. uncorrected system performance directivity specifications typicals option option option option option option option option 020, 025, 120, 125 220, 225 420, 425 520, 525 020, 025, 120, 125 220, 225 420, 425 520, 525 300 khz to 10 mhz 16 db 10 to 45 mhz 28 db 23 db 20 db 20 db 45 to 500 mhz 28 db 24 db 23 db 23 db 500 mhz to 1 ghz 28 db 27 db 23 db 23 db 1 to 2 ghz 25 db 27 db 23 db 23 db 2 to 3 ghz 25 db 21 db 21 db 21 db 3 to 5 ghz 20 db 21 db 21 db 21 db 5 to 8 ghz 17 db 21 db 21 db 21 db 8 to 11.5 ghz 17 db 16 db 16 db 16 db 11.5 to 13.5 ghz 15 db 16 db 16 db 16 db 13.5 to 20 ghz 16 db 16 db 16 db 20 to 40 ghz 15 db 15 db 40 to 50 ghz 13 db source match option option option option option option option option 020, 025, 120, 125 220, 225 420, 425 520, 525 020, 025, 120, 125 220, 225 420, 425 520, 525 300 khz to 10 mhz 18 db 10 to 45 mhz 25 db 12 db 11 db 11 db 45 to 500 mhz 25 db 20 db 17 db 17 db 500 mhz to 2 ghz 21 db 17 db 17 db 17 db 2 to 3 ghz 19 db 12 db 12 db 12 db 3 to 8 ghz 12 db 12 db 12 db 12 db 8 to 9 ghz 12 db 11 db 11 db 11 db 9 to 12.5 ghz 10 db 11 db 11 db 11 db 12.5 to 13.5 ghz 8 db 10 db 11 db 11 db 13.5 to 20 ghz 10 db 11 db 11 db 20 to 40 ghz 7 db 7 db 40 to 50 ghz 6 db load match option option option option option option option option 020, 025, 120, 125 220, 225 420, 520 425, 525 020, 025, 120, 125 220, 225 420, 425 520, 525 300 khz to 10 mhz 17 db 10 to 45 mhz 22 db 15 db 13 db 13 db 45 to 500 mhz 22 db 22 db 18 db 18 db 500 mhz to 2 ghz 17 db 20 db 18 db 18 db 2 to 3 ghz 14 db 12 db 14 db 14 db 3 to 8 ghz 10 db 12 db 14 db 14 db 8 to 9 ghz 9 db 10 db 12 db 12 db 9 to 12.5 ghz 9 db 10 db 12 db 12 db 12.5 to 13.5 ghz 7 db 9 db 9 db 9.5 db 13.5 to 20 ghz 9 db 9 db 9.5 db 20 to 40 ghz d % 8.5 db 40 to 50 ghz g % 5 db crosstalk 1 option option option option option option option option 020, 025, 120, 125 220, 225 420, 425 520, 525 020, 025, 120, 125 220, 225 420, 425 520, 525 300 khz to 10 mhz 75 db 2 10 to 45 mhz 115 db 88 db 88 db 88 db 45 to 500 mhz 122 db 95 db 94 db 94 db 500 mhz to 2 ghz 122 db 96 db 95 db 95 db 2 to 8 ghz 122 db 110 db 108 db 108 db 8 to 10.5 ghz 120 db 116 db 113 db 113 db 10.5 to 12.5 ghz 115 db 116 db 113 db 113 db 12.5 to 13.5 ghz 109 db 115 db 112 db 112 db 13.5 to 20 ghz 115 db 112 db 112 db 20 to 40 ghz 97 db 97 db 40 to 50 ghz 89 db 1. measurement conditions: normalized to a thru, measured with two shorts, 10 hz if bandwidth, averaging factor of 8, alternate mode, source power set to the specified maximum power output or the minimum receiver input power specified by the 0.1 db compression power. 2. value changed july 2006. 19 table 10. test port output 1 description specifications typicals option option option option option option option option option 020, 025 120, 125 220, 225 420, 425 520, 525 020, 025, 120, 125 220, 225 420, 425 520, 525 frequency range N5230A 300 khz 300 khz 10 mhz 10 mhz 10 mhz to 6 ghz to 13.5 ghz to 20 ghz to 40 ghz to 50 ghz nominal power preset power; attenuator switch point 10 db below nominal power 0 dbm 0 dbm C5 dbm C10 dbm C15 dbm frequency resolution 1 hz cw accuracy 1 ppm frequency stability 0.05 ppm. C10 to 70 c 0.1 ppm/yr maximum description specifications typicals option option option option option option option option 020, 025, 220, 225 420, 425 520 525 020, 025, 220, 225 420, 425, 120, 125 120, 125 520, 525 power level accuracy variation from nominal power in range 0 300 khz to 10 mhz 1.0 db 10 to 45 mhz 1.0 db 0.5 db 0.5 db 45 mhz to 6 ghz 1.0 db 1.0 db 1.0 db 1.0 db 1.0 db 6 to 8 ghz 1.5 db 1.0 db 1.0 db 1.0 db 1.0 db 8 to 9 ghz 1.5 db 1.0 db 1.5 db 1.5 db 1.5 db 9 to 10.5 ghz 1.5 db 1.0 db 1.5 db 1.5 db 1.5 db 10.5 to 13.5 ghz 2.0 db 1.0 db 1.5 db 1.5 db 1.5 db 13.5 to 20 ghz 1.0 db 1.5 db 1.5 db 1.5 db 20 to 40 ghz 2.5 db 2.5 db 2.5 db 40 to 50 ghz 3.5 db 3.5 db description specifications typicals option option option option option option option option 020, 120 025, 125 220, 225 420 425 520 525 220, 225 max leveled power 300 khz to 10 mhz 10 dbm 9 dbm 10 to 45 mhz 10 dbm 9 dbm 5 dbm 45 mhz to 6 ghz 10 dbm 9 dbm 5 dbm 0 dbm 0 dbm 0 dbm 0 dbm 6 to 9 ghz 8 dbm 8 dbm 5 dbm 0 dbm 0 dbm 0 dbm 0 dbm 9 to 12.5 ghz 4 dbm 4 dbm 5 dbm 0 dbm 0 dbm 0 dbm 0 dbm 12.5 to 13.5 ghz 2 dbm 1 dbm 3 dbm 0 dbm 0 dbm 0 dbm 0 dbm 13.5 to 20 ghz 3 dbm 0 dbm 0 dbm 0 dbm 0 dbm 20 to 40 ghz C5 dbm C8 dbm C5 dbm C8 dbm 40 to 50 ghz C11 dbm C15 dbm power level linearity 2 options as indicated test reference is at the nominal power level 300 khz to 1 mhz 4.5 db 4.5 db 2.0 db (opt 020, 025, 120, 125) 1 to 10 mhz 1.0 db 1.0 db 10 to 45 mhz 2.0 db 2.0 db 0.35 db (opt 220, 225) 0.40 db (opt 420, 425, 520, 525) 45 mhz to 1 ghz 2.0 db 2.0 db 1.0 db 1.0 db 1.0 db 1.0 db 1.0 db 1 to 12.5 ghz 1.5 db 1.5 db 1.0 db 1.0 db 1.0 db 1.0 db 1.0 db 12.5 to 13.5 ghz 1.5 db 1.5 db 1.0 db 1.0 db 1.0 db 1.0 db 1.0 db 13.5 to 20 ghz 1.0 db 1.0 db 1.0 db 1.0 db 1.0 db 20 to 40 ghz 1.0 db 1.0 db 1.0 db 1.0 db 40 to 50 ghz 1.0 db 1.0 db 1. performance specified on port 1 only. port 2 performance is a characteristic. 2. power level linearity specified on port 1 only. port 2 performance is typical. test reference is at the nominal power level. 20 table 10. test port output 1 (continued) description specifications typicals option option option option option option option option 020, 120 025, 125 220, 225 420 425 520 525 220, 225 power sweep range (alc) 2 300 khz to 10 mhz 37 db 36 db 10 to 45 mhz 37 db 36 db 25 db 45 mhz to 6 ghz 37 db 36 db 25 db 25 db 25 db 25 db 25 db 6 to 9 ghz 35 db 35 db 25 db 25 db 25 db 25 db 25 db 9 to 12.5 ghz 31 db 31 db 25 db 25 db 25 db 25 db 25 db 12.5 to 13.5 ghz 29 db 28 db 23 db 25 db 25 db 25 db 25 db 13.5 to 20 ghz 23 db 25 db 25 db 25 db 25 db 20 to 40 ghz 20 db 17 db 20 db 17 db 40 to 50 ghz 14 db 10 db power resolution options as indicated 0.01 db (all options) description specification typicals option 020, 120 option 025, 125 option 220 option 225 option 420, 520 option 425, 525 power range 300 khz to 10 mhz C30 to +10 dbm C90 to +9 dbm 10 to 45 mhz C30 to +10 dbm C90 to +9 dbm C27 to +12 dbm C87 to +12 dbm C27 to +9 dbm C87 to +8 dbm 45 mhz to 6 ghz C30 to +10 dbm C90 to +9 dbm C27 to +12 dbm C87 to +12 dbm C27 to +8 dbm C87 to +8 dbm 6 to 9 ghz C30 to +8 dbm C90 to +8 dbm C27 to +12 dbm C87 to +12 dbm C27 to +8 dbm C87 to +8 dbm 9 to 12.5 ghz C30 to +4 dbm C90 to +4 dbm C27 to +12 dbm C87 to +12 dbm C27 to +8 dbm C87 to +8 dbm 12.5 to 13.5 ghz C30 to +2 dbm C90 to +1 dbm C27 to +7 dbm C87 to +7 dbm C27 to +5 dbm C87 to +4 dbm 13.5 to 20 ghz C27 to +7 dbm C87 to +7 dbm C27 to +5 dbm C87 to +4 dbm 20 to 40 ghz C27 to +1 dbm C87 to C2 dbm 40 to 50 ghz C27 to C5 dbm C87 to C9 dbm power settings minimum power setting C33 dbm C93 dbm C30 dbm C90 dbm C30 dbm C90 dbm maximum power setting +20 dbm +20 dbm +20 dbm +20 dbm +20 dbm +20 dbm description specification typicals option 020, 025, 120, 125 option 220, 225, 420, 425, 520, 525 phase noise (nominal power at test port) 10 khz offset 100 khz offset 1 mhz offset 10 khz offset 100 khz offset 1 mhz offset 300 khz to 10 mhz C86 dbc/hz C86 dbc/hz C95 dbc/hz 10 mhz to 1.5 ghz C86 dbc/hz C91 dbc/hz C95 dbc/hz C77 dbc/hz C77 dbc/hz C89 dbc/hz 1.5 to 3.125 ghz C83 dbc/hz C91 dbc/hz C95 dbc/hz C83 dbc/hz C91 dbc/hz C95 dbc/hz 3.125 to 6.25 ghz C77 dbc/hz C85 dbc/hz C89 dbc/hz C77 dbc/hz C85 dbc/hz C89 dbc/hz 6.25 to 12.5 ghz C71 dbc/hz C79 dbc/hz C83 dbc/hz C71 dbc/hz C79 dbc/hz C83 dbc/hz 12.5 to 13.5 ghz C65 dbc/hz C73 dbc/hz C77 dbc/hz C65 dbc/hz C73 dbc/hz C77 dbc/hz 13.5 to 20 ghz C65 dbc/hz C73 dbc/hz C77 dbc/hz 20 to 40 ghz C59 dbc/hz C67 dbc/hz C71 dbc/hz 40 to 50 ghz C59 dbc/hz C67 dbc/hz C71 dbc/hz non-harmonic spurious (at nominal output power) 300 khz to 10 mhz 10 mhz to 13.5 ghz C50 dbc for offset frequency > 1 khz 13.5 to 20 ghz 20 to 40 ghz 40 to 50 ghz C30 dbc for offset frequency > 1 khz description specification typicals option 020, 025, 120, 125 option 220, 225 option 420, 425 option 520, 525 harmonics (2nd or 3rd) at maximum output power 300 khz to 10 mhz C17 dbc 10 to 500 mhz C17 dbc C22 dbc C15 dbc C15 dbc 500 mhz to 1 ghz C17 dbc C22 dbc C15 dbc C15 dbc 1 to 13.5 ghz C20 dbc C22 dbc C20 dbc C20 dbc 13.5 to 20 ghz C22 dbc C20 dbc C20 dbc 20 to 40 ghz C22 dbc C22 dbc 40 to 50 ghz C22 dbc 1. performance specified on port 1 only. port 2 performance is a characteristic. 2. alc range starts at maximum leveled power and decreases in power level indicated by the db amount specified here. 21 table 11: test port input description specifications typicals option option option option option option option option 020, 025, 120, 125 220, 225 420, 425 520, 525 020, 025, 120, 125 220, 225 420, 425 520, 525 test port noise floor 1 10 hz if bandwidth 2 300 khz to 3 mhz 3 < C83 dbm < C94 dbm 3 to 10 mhz < C103 dbm < C110 dbm 10 to 45 mhz < C112 dbm < C116 dbm < C89 dbm < C80 dbm < C80 dbm 45 to 70 mhz < C112 dbm < C96 dbm < C90 dbm < C90 dbm < C116 dbm 70 to 500 mhz < C112 dbm < C100 dbm < C90 dbm < C90 dbm < C116 dbm 500 mhz to 2 ghz < C112 dbm < C105 dbm < C110 dbm < C110 dbm < C120 dbm 2 to 4 ghz < C112 dbm < C105 dbm < C110 dbm < C110 dbm < C120 dbm 4 to 8 ghz < C112 dbm < C105 dbm < C110 dbm < C110 dbm < C119 dbm 8 to 10.5 ghz < C112 dbm < C105 dbm < C100 dbm < C100 dbm < C119 dbm 10.5 to 13.5 ghz < C107 dbm < C105 dbm < C100 dbm < C100 dbm < C114 dbm 13.5 to 20 ghz < C105 dbm < C100 dbm < C100 dbm 20 to 31.25 ghz < C100 dbm < C100 dbm 31.25 to 40 ghz < C95 dbm < C95 dbm 40 to 50 ghz < C90 dbm test port noise floor 1 1 khz if bandwidth 300 khz to 3 mhz 3 < C73 dbm < C83 dbm 3 to 10 mhz < C83 dbm < C90 dbm 10 to 45 mhz < C92 dbm < C96 dbm < C69 dbm < C60 dbm < C60 dbm 45 to 70 mhz < C92 dbm < C76 dbm < C70 dbm < C70 dbm < C96 dbm 70 to 500 mhz < C92 dbm < C80 dbm < C70 dbm < C70 dbm < C96 dbm 500 mhz to 2 ghz < C92 dbm < C85 dbm < C90 dbm < C90 dbm < C100 dbm 2 to 4 ghz < C92 dbm < C85 dbm < C90 dbm < C90 dbm < C100 dbm 4 to 8 ghz < C92 dbm < C85 dbm < C90 dbm < C90 dbm < C99 dbm 8 to 10.5 ghz < C92 dbm < C85 dbm < C80 dbm < C80 dbm < C99 dbm 10.5 to 13.5 ghz < C87 dbm < C85 dbm < C80 dbm < C80 dbm < C94 dbm 13.5 to 20 ghz < C85 dbm < C80 dbm < C80 dbm 20 to 31.25 ghz < C80 dbm < C80 dbm 31.25 to 40 ghz < C75 dbm < C75 dbm 40 to 50 ghz < C70 dbm description specifications typicals option option option option option option option option 020, 125 225 425 525 020, 125 225 425 525 direct receiver access input noise floor 1 10 hz if bandwidth 2 300 khz to 3 mhz 3 < C99 dbm 3 to 10 mhz < C119 dbm 10 to 45 mhz < C128 dbm < C120 dbm < C126 dbm < C126 dbm 45 to 70 mhz < C128 dbm < C108 dbm < C111 dbm < C111 dbm 70 to 500 mhz < C128 dbm < C112 dbm < C111 dbm < C111 dbm 500 mhz to 2 ghz < C128 dbm < C117 dbm < C122 dbm < C122 dbm 2 to 8 ghz < C128 dbm < C117 dbm < C122 dbm < C122 dbm 8 to 10.5 ghz < C128 dbm < C117 dbm < C112 dbm < C112 dbm 10.5 to 13.5 ghz < C128 dbm < C117 dbm < C112 dbm < C112 dbm 13.5 to 20 ghz < C117 dbm < C112 dbm < C112 dbm 20 to 31.25 ghz < C111 dbm < C111 dbm 31.25 to 40 ghz < C106 dbm < C106 dbm 40 to 50 ghz < C98 dbm direct receiver access input noise floor 1 1 khz if bandwidth 300 khz to 3 mhz 3 < C89 dbm 3 to 10 mhz < C99 dbm 10 to 45 mhz < C108 dbm < C100 dbm < C106 dbm < C106 dbm 45 to 70 mhz < C108 dbm < C88 dbm < C91 dbm < C91 dbm 70 to 500 mhz < C108 dbm < C92 dbm < C91 dbm < C91 dbm 500 mhz to 2 ghz < C108 dbm < C97 dbm < C102 dbm < C102 dbm 2 to 8 ghz < C108 dbm < C97 dbm < C102 dbm < C102 dbm 8 to 10.5 ghz < C108 dbm < C97 dbm < C92 dbm < C92 dbm 10.5 to 13.5 ghz < C108 dbm < C97 dbm < C92 dbm < C92 dbm 13.5 to 20 ghz < C97 dbm < C92 dbm < C92 dbm 20 to 31.25 ghz < C91 dbm < C91 dbm 31.25 to 40 ghz < C86 dbm < C86 dbm 40 to 50 ghz < C78 dbm 1. total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dbm. 2. 10 hz ifbw test port noise floor performance is mathematically derived from the 1 khz ifbw noise floor performance. the perf ormance could be limited by crosstalk below 3 mhz at certain frequencies. the measurement is defined as a single receiver measurement with load s on the ports at a given cw frequency with power set to the minimum plus 5 db. 3. value and/or frequency changed july 2006. 22 table 11: test port input (continued) description specifications typicals option option option option 220, 225 420, 520 425, 525 220, 225 compression level power compression power compression power compression power compression 10 to 45 mhz 2 +5 dbm 0.10 db 45 to 500 mhz +5 dbm 0.10 db +5 dbm 0.40 db +5 dbm 0.40 db 500 mhz to 2 ghz +5 dbm 0.15 db +5 dbm 0.77 db +5 dbm 0.67 db 2 to 8 ghz +5 dbm 0.21 db +5 dbm 0.75 db +5 dbm 0.55 db 8 to 12.5 ghz +5 dbm 0.21 db +5 dbm 0.56 db +5 dbm 0.51 db 12.5 to 20 ghz +3 dbm 0.20 db +5 dbm 0.79 db +5 dbm 0.69 db 20 to 31.25 ghz 0 dbm 0.60 db 0 dbm 0.50 db 31.25 to 40 ghz C3 dbm 0.55 db C3 dbm 0.60 db 40 to 50 ghz C3 dbm 0.66 db C3 dbm 0.71 db description specifications typicals description specifications typicals option 020, 120, 025, 125 option 020, 120, 025, 125 compression level compression level C 0.1 db power compression power compression 300 khz to 10 mhz +8 dbm 1.0 db 0.1 db at +5 dbm 300 khz to 10 mhz +5 dbm 0.1 db 10 to 50 mhz +8 dbm 0.35 db 10 mhz to 1 ghz +9 dbm 0.1 db 50 mhz to 1 ghz +8 dbm 0.35 db 1 to 12.5 ghz +10 dbm 0.1 db 1 to 6 ghz +8 dbm 0.25 db 12.5 to 13.5 ghz +9 dbm 0.1 db 6 to 8 ghz +8 dbm 0.25 db 8 to 12.5 ghz +8 dbm 0.30 db 12.5 to 13.5 ghz +8 dbm 0.40 db description specifications typicals option option option option option option option 220, 225 420, 425 520, 525 220 225 420, 425 520, 525 test port compression - 0.1 db 300 khz to 10 mhz 10 to 45 mhz 2 +10 dbm negligible negligible negligible 45 to 500 mhz +10 dbm +10 dbm 0.0 dbm +1.0 dbm 500 mhz to 2 ghz +9 dbm +9 dbm 0.0 dbm +1.0 dbm 2 to 12.5 ghz +6 dbm +6 dbm 0.0 dbm +1.5 dbm 12.5 to 13.5 ghz +6 dbm +6 dbm C1.0 dbm 0.0 dbm 13.5 to 20 ghz +6 dbm +6 dbm C1.0 dbm 0.0 dbm 20 to 31.25 ghz C5.5 dbm C3.0 dbm 31.25 to 40 ghz C8.5 dbm C7.5 dbm 40 to 50 ghz C10.0 dbm trace noise magnitude 3 1 khz if bandwidth , ratioed measurement, nominal power at test port. 300 khz to 10 mhz 10 to 45 mhz 0.004 db rms 0.015 db rms 0.015 db rms 45 to 500 mhz 0.004 db rms 0.010 db rms 0.010 db rms 500 mhz to 2 ghz 0.004 db rms 0.006 db rms 0.006 db rms 2 to 10.5 ghz 0.004 db rms 0.006 db rms 0.006 db rms 10.5 to 13.5 ghz 0.006 db rms 0.010 db rms 0.010 db rms 13.5 to 20 ghz 0.006 db rms 0.010 db rms 0.010 db rms 20 to 31.25 ghz 0.010 db rms 0.010 db rms 31.25 to 40 ghz 0.020 db rms 0.020 db rms 40 to 50 ghz 0.020 db rms 1. total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dbm. 2. for options 225, 420, 425, 520, and 525 coupler roll-off will reduce compression to a negligible level below 45 mhz. 3. 1 khz if bw, ratioed measurement, nominal power at the test port. 4. stability is defined as a ratio measurement made at the test port. 23 table 11: test port input (continued) description specifications typicals option 020, 120, 025, 125 option 020, 120, 025, 125 trace noise magnitude 3 (continued) 100 khz if bandwidth , ratioed measurement, nominal power at test port. 300 khz to 10 mhz 12 mdb 10 mhz to 6 ghz 4 mdb 6 to 10.5 ghz 4 mdb 10.5 to 13.5 ghz 8 mdb 600 khz if bandwidth , ratioed measurement, nominal power at test port. 300 khz to 10 mhz 20 mdb 10 mhz to 6 ghz 8 mdb 6 to 10.5 ghz 8 mdb 10.5 to 13.5 ghz 10 mdb description specifications typicals option option option option option option 220, 225 420, 425 520, 525 220, 225 420, 425 520, 525 trace noise phase 3 1 khz if bandwidth , ratioed measurement, nominal power at test port. 300 khz to 10 mhz 10 to 45 mhz 0.025 rms 0.100 rms 0.100 rms 45 to 500 mhz 0.060 rms 0.100 rms 0.100 rms 500 mhz to 2 ghz 0.060 rms 0.060 rms 0.060 rms 2 to 10.5 ghz 0.060 rms 0.060 rms 0.060 rms 10.5 to 13.5 ghz 0.060 rms 0.100 rms 0.100 rms 13.5 to 20 ghz 0.060 rms 0.100 rms 0.100 rms 20 to 31.25 ghz 0.100 rms 0.100 rms 31.25 to 40 ghz 0.200 rms 0.200 rms 40 to 50 ghz 0.200 rms description specifications typicals option 020, 120, 025, 125 option 020, 120, 025, 125 trace noise phase 3 100 khz if bandwidth , ratioed measurement, nominal power at test port. 300 khz to 10 mhz 80 mdeg 10 mhz to 6 ghz 30 mdeg 6 to 10.5 ghz 30 mdeg 10.5 to 13.5 ghz 60 mdeg 600 khz if bandwidth , ratioed measurement, nominal power at test port. 300 khz to 10 mhz 100 mdeg 10 mhz to 6 ghz 60 mdeg 6 to 10.5 ghz 60 mdeg 10.5 to 13.5 ghz 80 mdeg description specifications typicals option option 020, 025, 120, 125, 220, 225, 420, 425, 520, 525 020, 025, 120, 125, 220, 225, 420, 425, 520, 525 reference level magnitude range 200 db resolution 0.001 db reference level phase range 500 resolution 0.01 1. total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dbm. 2. for options 225, 420, 425, 520, and 525 coupler roll-off will reduce compression to a negligible level below 45 mhz. 3. 1 khz if bw, ratioed measurement, nominal power at the test port. 4. stability is defined as a ratio measurement made at the test port. 24 table 11: test port input (continued) description specifications typicals option option option option option option 020, 025, 120, 125 220, 225 420, 425, 520, 525 020, 025, 120, 125 220, 225 420, 425, 520, 525 stability magnitude 4 300 khz to 10 mhz 0.015 db/c 10 to 45 mhz 0.010 db/c 0.015 db/c 0.015 db/c 45 to 500 mhz 0.010 db/c 0.010 db/c 0.010 db/c 500 mhz to 2 ghz 0.010 db/c 0.010 db/c 0.010 db/c 2 to 4 ghz 0.015 db/c 0.020 db/c 0.010 db/c 4 to 8 ghz 0.020 db/c 0.020 db/c 0.010 db/c 8 to 13.5 ghz 0.020 db/c 0.030 db/c 0.015 db/c 13.5 to 20 ghz 0.030 db/c 0.015 db/c 20 to 40 ghz 0.040 db/c 40 to 50 ghz 0.060 db/c stability phase 4 300 khz to 10 mhz 0.30/c 10 to 45 mhz 0.025/c 0.25/c 0.25/c 45 to 500 mhz 0.035/c 0.20/c 0.22/c 500 mhz to 2 ghz 0.050/c 0.15/c 0.22/c 2 to 4 ghz 0.10/c 0.15/c 0.10/c 4 to 8 ghz 0.15/c 0.15/c 0.10/c 8 to 13.5 ghz 0.30/c 0.45/c 0.15/c 13.5 to 20 ghz 0.45/c 0.15/c 20 to 40 ghz 0.40/c 40 to 50 ghz 0.40/c description specifications typicals option option option option option 020, 120 220 420, 520 025, 125 225, 425, 525 damage input level test port 1 and 2 +27 dbm or +30 dbm or +30 dbm or +27 dbm or +27 dbm or 16 vdc 25 vdc 40 vdc 16 vdc 7 vdc r1, r2 in +15 dbm or +15 dbm or 16 vdc 7 vdc a, b in +15 dbm or +15 dbm or 16 vdc 7 vdc coupler thru +27 dbm or +30 dbm or 16 vdc 40 vdc coupler arm +15 dbm or +30 dbm or 0 vdc 7 vdc source out (reference) +20 dbm or +20 dbm or 16 vdc 7 vdc source out (test ports) +27 dbm or +30 dbm or 16 vdc 7 vdc 1. total average (rms) noise power calculated as the mean value of a linear magnitude trace expressed in dbm. 2. for options 225, 420, 425, 520, and 525 coupler roll-off will reduce compression to a negligible level below 45 mhz. 3. 1 khz if bw, ratioed measurement, nominal power at the test port. 4. stability is defined as a ratio measurement made at the test port. 25 dynamic accuracy note: dynamic accuracy uncertainty curves are available within the pna-l network analyzers internal help system. the help system is also available online at www.agilent.com . navigate to the home page for your pna model, then click on manuals & guides. please download our free uncertainty calculator from www.agilent.com/find/na_calculator to generate the curves for your calibration kit and pna setup. table 12. test port input (group delay) 1 description specification supplemental information (typ.) aperture (selectable) (frequency span)/(number of points C1) maximum aperture 20% of frequency span range 0.5 x (1/minimum aperture) maximum delay limited to measuring no more than 180 of phase change within the minimum aperture accuracy see graph below. char. the following graph shows characteristic group delay accuracy with full 2-port calibration and a 10 hz if bandwidth. insertion loss is assumed to be < 2 db and electrical length to be ten meters. in general, the following formula can be used to determine the accuracy, in seconds, of specific group delay measurement: phase accuracy (deg)/[360 aperture (hz)] depending on the aperture and device length, the phase accuracy used is either incremental phase accuracy or worst case phase accuracy. 1. group delay is computed by measuring the phase change within a specified frequency step (determined by the frequency span and the number of points per sweep). group delay (typical) aperture (mhz) accuracy (nsec) 26 general information table 13. miscellaneous information description supplemental information system if bandwidth range option 020, 025, 120, 125 1 hz to 600 khz, nominal option 220, 225, 420, 425, 520, 525 1 hz to 250 khz, nominal cpu intel ? 1.1 ghz pentium ? m with 1 gbyte ram table 14. front panel information description supplemental information rf connectors N5230A type option 020, 025, 120, 125, 220 or 225: 3.5 mm (male), 50 ohm, (nominal) option 420, 425, 520, or 525: 2.4 mm (male), 50 ohm, (nominal) center pin recession 0.002 in. (characteristic) display size 21.3 cm (8.4 in) diagonal color active matrix lcd; 640 (horizontal) x 480 (vertical) resolution refresh rate vertical 59.83 hz; horizontal 31.41 khz pixels a display is considered faulty if: ? a complete row or column of "stuck" or "dark" pixels. ? more than six "stuck on" pixels (but not more than three green) or more than 0.002% of the total pixels are within the lcd specifications. ? more than twelve "dark" pixels (but no more than seven of the same color) or more than 0.004% of the total pixels are within the lcd specifications. ? two or more consecutive "stuck on" pixels or three or more consecutive "dark" pixel (but no more than one set of two consecutive dark pixels) "stuck on" of "dark" pixels less than 6.5 mm apart (excluding consecutive pixels) display range the pna display must remain in the 16-bit color setting in order to comply with international emissions regulations magnitude 500 db (at 20 db/div), max phase 500, max polar 10 punits, min 1000 units, max display resolution magnitude 0.001 db/div, min phase 0.01/div, min marker resolution magnitude 0.001 db, min phase 0.01, min polar 0.01 munit, min; 0.01, min 1. any pna service guide contains instructions for running the analyzers built-in display test. you can view a pdf file of a service guide on the web at www.agilent.com/find/pna. after opening the pdf file, look in the left-side column and then click on the index bookmark. from the index, click on display test. 27 table 15. rear panel information description supplemental information trigger inputs/outputs bnc (f), ttl/cmos compatible 10 mhz reference in connector bnc, female input frequency 10 mhz 10 ppm, typical input level C15 to +20 dbm, typical input impedance 200 ?, nom. 10 mhz reference out connector bnc, female output frequency 10 mhz 1 ppm, typical signal type sine wave, typical output level +10 dbm 4 db into 50 w, typical output impedance 50 ?, nominal harmonics < C40 dbc, typical vga video output connector 15-pin mini d-sub; drives vga compatible monitors test set io 25-pin d-sub connector, available for external test set control aux io 25-pin d-sub connector, male, analog and digital i/o handler io 36-pin parallel i/o port; all input/output signals are default set to negative logic; can be reset to positive logic via gpib command gpib two ports: dedicated controller and dedicated talker/listener. 24-pin d-sub (type d-24), female; compatible with ieee-488. usb port 1 port on front panel and 4 ports on rear panel. lan 10/100baset ethernet, 8-pin configuration; auto selects between the two data rates line power (single phase) frequency, voltage 50/60 hz/400 hz for 100 to 120v, 50/60 hz for 220 to 240 v, (power supply is auto switching) maximum 350 watts note: option h08 and option h11 specifications are not provided in this N5230A specifications document. 28 table 16. analyzer environment and dimensions description supplemental information general environmental emc complies with european emc directive 89/336/eec, amended by 93/68/eec ? iec/en 61326 ? cispr pub 11 group 1, class a ? as/nzs cispr ii:2002 ? ices/nmb-001 safety complies with european low voltage directive 73/23/eec, amended by 93/68/eec ? iec/en 61010-1:2001 ? canada: csa c22.2 no. 61010-1:2001 ? usa: ul 61010-1 operating environment temperature 0 to +40 c instrument powers up and displays no error messages within this temperature range (except for "source unleveled" error message that may occur at temperatures outside the specified performance temperature range of 25 5 c). error-corrected temperature range 23 c 3 c with less than 1 c deviation from calibration temp. relative humidity type-tested 0 to 95% at 40 c, non-condensing altitude 0 to 4600 m (15,000 ft.) non-operating storage environment temperature C40 to +70 c cabinet dimensions height width depth excluding front and rear panel hardware and feet 267 mm 426 mm 427 mm 10.5 in 16.75 16.8 in as shipped - includes front panel connectors, 280 mm 435 mm 470 mm rear panel bumpers, and feet. 11 in 17.10 in 18.5 in as shipped plus handles 280 mm 458 mm 501 mm 11 in 18 in 19.7 in as shipped plus rack-mount flanges 280 mm 483 mm 470 mm 11 in 19 in 18.5 in as shipped plus handles and rack-mount flanges 280 mm 483 mm 501 mm 11 in 19 in 19.7 in weight net N5230A 24.9 kg (55 lb), nominal shipping N5230A 36.3 kg (80 lb), nominal 29 measurement throughput summary table 17. typical cycle time 1,2 (ms) for measurement completion number of points 201 401 801 1601 16,001 start 8 ghz, stop 18 ghz, 30 khz if bandwidth uncorrected 97.5 102.7 103.8 108.2 683.9 2-port cal 203.7 213.5 218.5 234.6 1504.3 start 10 mhz, stop 10 ghz, 30 khz if bandwidth uncorrected 112.6 120.6 124.8 138.2 738.4 2-port cal 232.8 251.8 265.2 304.3 1623.4 start 10 mhz, stop 20 ghz, 30 khz if bandwidth uncorrected 146 199.3 210.9 217.2 753.9 2-port cal 302.3 410.5 438.7 462.5 1660.5 start 8 ghz, stop 18 ghz, 50 khz if bandwidth uncorrected 79.1 81 81.7 86.6 482 2-port cal 164.5 170.3 175.3 193.5 1104.7 start 10 mhz, stop 10 ghz, 50 khz if bandwidth uncorrected 96.8 101.7 108.8 122.2 524.6 2-port cal 202.1 215.6 236.7 276.7 1198.8 start 10 mhz, stop 20 ghz, 50 khz if bandwidth uncorrected 141.6 163.9 170.7 179.7 546.5 2-port cal 293.6 341 360 389.5 1248.8 1. typical performance. 2. includes sweep time, retrace time and band-crossing time. analyzer display turned off with display:enable off. add 21 ms for display on. data for one trace (s11) measurement. 425.60 16.756 N5230A 266.12 10.477 4x 26.90 1.059 4x 6x 26.90 1.059 23.04 .907 13.71 .540 3x 3x 27.80 1.094 54.70 2.154 3.655 92.82 240.00 9.449 3x 3x 27.80 1.094 54.70 2.154 30 table 18. cycle time vs if bandwidth 1 (options 020, 025, 120, 125 only) applies to the preset condition (201 points, correction off) except for the following changes: ? cf = 10 ghz ? span = 100 mhz ? display off (add 21 ms for display on) description typical performance if bandwidth (hz) cycle time (ms) 2 trace noise (db rms) 600,000 7 0.0035 360,000 7 0.0026 280,000 7 0.0022 200,000 7 0.0021 150,000 7 0.0016 100,000 7 0.0012 70,000 7 0.0011 50,000 9 0.0009 30,000 11 0.0008 20,000 14 0.0006 15,000 17 0.0005 10,000 28 0.0004 7,000 37 0.0004 5,000 48 0.0003 3,000 72 0.0003 2,000 102 0.0002 1,500 130 0.0001 1,000 218 0.0001 700 294 0.0001 500 399 0.0001 300 636 0.0001 200 932 negligible 100 1,826 negligible 30 6,004 negligible 10 17,903 negligible 1 178,398 negligible 1. typical performance. 2. cycle time includes sweep and retrace time. table 21. cycle time vs number of points 1 ( options 220, 225, 420, 425, 520, 525 only) 31 table 19. cycle time vs if bandwidth 1 (options 220, 225, 420, 425, 520, 525 only) applies to the preset condition (201 points, correction off) except for the following changes: ? cf = 10 ghz ? span = 100 mhz ? display off (add 21 ms for display on) description typical performance if bandwidth (hz) cycle time (ms) 2 cycle time (ms) option 080 enabled 250,000 8 37 200,000 9 39 150,000 9 40 100,000 10 41 70,000 11 43 50,000 12 45 30,000 15 50 20,000 18 53 15,000 21 57 10,000 27 65 7,000 34 75 5,000 48 93 3,000 72 124 2,000 108 169 1,500 126 187 1,000 272 700 357 500 460 300 697 200 1003 150 1307 100 1917 30 6173 10 18214 1 181699 1. typical performance. 2. cycle time includes sweep and retrace time. 32 table 20. cycle time vs number of points 1 (options 020, 025, 120, 125 only) applies to the preset condition (201 points, correction off) except for the following changes: ? cf = 10 ghz ? span = 100 mhz ? display off (add 21 ms for display on) description typical performance if bandwidth (hz) number of points cycle time (ms) 2 30,000 3 6 11 7 51 6 101 7 201 11 401 18 801 32 1,601 59 6,401 224 16,001 556 300,000 3 6 11 6 51 6 101 7 201 7 401 9 801 13 1,601 22 6,401 75 16,0001 180 600,000 3 6 11 6 51 6 101 6 201 7 401 8 801 9 1,601 12 6,401 27 16,0001 59 1. typical performance. 2. cycle time includes sweep and retrace time. 33 applies to the preset condition (correction off) except for the following changes: ? cf = 10 ghz ? span = 100 mhz ? display off (add 21 ms for display on) if bandwidth (hz) number of points cycle time (ms) 2 30,000 3 8 11 8 51 9 101 11 201 15 401 23 801 39 1,601 71 6,401 265 16,001 650 50,000 3 7 11 7 51 8 101 10 201 13 401 18 801 29 1,601 52 6,401 184 16,001 448 250,000 101 8 201 9 401 10 801 14 1,601 21 6,401 61 16,001 147 1. typical performance. 2. cycle time includes sweep and retrace time. note: specifications for recall and sweep speed are not provided for the N5230A analyzers. 34 table 22. data transfer time (ms) 1 number of points 201 401 1601 16,001 scpi over gpib (program executed on external pc) 32-bit floating point 7 12 43 435 64-bit floating point 12 22 84 856 ascii 64 124 489 5054 scpi (program executed in the analyzer) 32-bit floating point 1 2 3 30 64-bit floating point 2 2 4 40 ascii 29 56 222 2220 com (program executed in the analyzer) 32-bit floating point < 0.4 0.4 0.5 1.9 variant type 0.7 1 3 32 dcom over lan (program executed on external pc) 32-bit floating point < 0.8 1 1.5 7.1 variant type 1.8 2.7 8.5 80 1. typical performance. note: specifications for recall and sweep speed are not provided for the N5230A analyzers. 35 specifications: front-panel jumpers model N5230A option 025, 125, 225, 425, or 525 note: the N5230A option 020, 120, 220, 420, or 520 (standard test set and standard power range) has no front-panel jumpers. table 23: measurement receiver inputs (rcvr a in, rcvr b in) 0-1 db typical compression specification typicals description option 025, 125 option 225 options 425, 525 maximum input level 300 khz to 10 mhz C11 dbm 10 to 45 mhz C7 dbm C2 dbm C20 dbm 45 to 500 mhz C7 dbm C2 dbm C19 dbm 500 mhz to 2 ghz C6 dbm C3 dbm C14 dbm 2 to 12.5 ghz C6 dbm C6 dbm C14 dbm 12.5 to 13.5 ghz C7 dbm C6 dbm C15 dbm 13.5 to 20 ghz C6 dbm C15 dbm 20 to 31.25 ghz C16 dbm 31.25 to 40 ghz C21 dbm 40 to 45 ghz C24 dbm 45 to 50 ghz C22 dbm damage level N5230A +15 dbm +15 dbm +15 dbm maximum dc level N5230A 16 v 7 v 7 v 36 table 24: reference receiver inputs (rcvr r1, rcvr r2) at maximum specified output power specification typicals description option 025, 125 option 225 options 425, 525 maximum input level 300 khz to 10 mhz C15 dbm 10 to 500 mhz C13 dbm C18 dbm C28 dbm 500 to 2 mhz C14 dbm C18 dbm C28 dbm 2 to 6 ghz C14 dbm C19 dbm C28 dbm 6 to 8 ghz C16 dbm C19 dbm C28 dbm 8 to 9 ghz C16 dbm C21 dbm C27 dbm 9 to 10.5 ghz C20 dbm C21 dbm C27 dbm 10.5 to 12.5 ghz C22 dbm C21 dbm C27 dbm 12.5 to 13.5 ghz C24 dbm C23 dbm C26 dbm 13.5 to 20 ghz C23 dbm C26 dbm 20 to 31.25 ghz C33 dbm 31.25 to 40 ghz C27 dbm 40 to 45 ghz C29 dbm 45 to 50 ghz C28 dbm damage level N5230A +15 dbm +15 dbm +15 dbm maximum dc level N5230A 16 v 7 v 7 v table 25: reference outputs (reference 1 source out, reference 2 source out) at maximum specified output power specification typicals description option 025, 125 option 225 options 425, 525 maximum output level 300 khz to 10 mhz C15 dbm 10 to 500 mhz C13 dbm C18 dbm C28 dbm 500 mhz to 2 ghz C14 dbm C18 dbm C28 dbm 2 to 6 ghz C14 dbm C19 dbm C28 dbm 6 to 8 ghz C16 dbm C19 dbm C28 dbm 8 to 9 ghz C16 dbm C20 dbm C27 dbm 9 to 10.5 ghz C20 dbm C20 dbm C27 dbm 10.5 to 12.5 ghz C22 dbm C20 dbm C27 dbm 12.5 to 13.5 ghz C24 dbm C23 dbm C26 dbm 13.5 to 20 ghz C23 dbm C26 dbm 20 to 31.25 ghz C32 dbm 31.25 to 40 ghz C26 dbm 40 to 45 ghz C29 dbm 45 to 50 ghz C28 dbm damage level N5230A +20 dbm +20 dbm +20 dbm maximum dc level N5230A 16 v 7 v 7 v 37 table 26: source outputs (port 1 source out, port 2 source out) at maximum specified output power specification typicals description option 025, 125 option 225 options 425, 525 maximum output level 300 khz to 10 mhz +11 dbm 10 to 500 mhz +11 dbm +6 dbm +1 dbm 500 mhz to 6 ghz +11 dbm +7 dbm +1 dbm 6 to 9 ghz +10 dbm +7 dbm +1 dbm 9 to 12.5 ghz +8 dbm +7 dbm +1 dbm 12.5 to 13.5 ghz +5 dbm +5 dbm +3 dbm 13.5 to 20 ghz +5 dbm +3 dbm 20 to 31.25 ghz C5 dbm 31.25 to 40 ghz C4 dbm 40 to 45 ghz C11 dbm 45 to 50 ghz C11 dbm damage level N5230A +27 dbm +30 dbm +30 dbm maximum dc level N5230A 16 v 7 v 7 v table 27: coupler inputs (port 1 cplr thru, port 2 cplr thru) specification typicals description option 025, 125 option 225 options 425, 525 insertion loss to test port 30 khz to 10 mhz 2 db 10 to 500 mhz 2 db 0.6 db 0.6 db 500 mhz to 2 ghz 3 db 1.6 db 0.8 db 2 to 8 ghz 3 db 1.8 db 1.0 db 8 to 9 ghz 3 db 1.9 db 1.0 db 9 to 12.5 ghz 4 db 1.9 db 1.0 db 12.5 to 13.5 ghz 4 db 2.0 db 2.0 db 13.5 to 20 ghz 2.0 db 2.0 db 20 to 31.25 ghz 3.0 db 31.25 to 50 ghz 4.0 db damage level N5230A +27 dbm +30 dbm +30 dbm maximum dc level N5230A 16 v 40 v 40 v table 28: coupler outputs (port 1 cplr arm, port 2 cplr arm) specification typicals description option 025, 125 option 225 options 425, 525 damage level N5230A +15 dbm +30 dbm +30 dbm maximum dc level N5230A +0 vdc +7 vdc +7 vdc 38 test set block diagrams N5230A option 020, 120, 220, 420, or 520 (standard test set and standard power range) network analyzer N5230A option 025, 125, 225, 425, or 525 (configurable test set and extended power range) network analyzer port 1 port 2 ab r1 r2 source out rcvr r1 in src out cplr thru cplr arm rcvr a in rc v r2 in rcvr b in cplr arm cplr thru src out port 1 port 2 ab r1 r2 source out rcvr r1 in src out cplr thru cplr arm rcvr a in rcvr r2 in source out rcvr b in cplr arm cplr thru src out 39 web resources visit our web sites for additional product information and literature. pna microwave network analyzers: www.agilent.com/find/pna pna-l network analyzers: www.agilent.com/find/pnal electronic calibration (ecal): www.agilent.com/find/ecal test and measurement solutions: www.agilent.com/find/accessories intel ? and pentium ? are us registered trademarks of intel corporation. www.agilent.com/find/emailupdates get the latest information on the products and applications you select. www.agilent.com/find/agilentdirect quickly choose and use your test equipment solutions with confidence. www.agilent.com/find/open agilent open simplifies the process of connecting and programming test systems to help engineers design, validate and manufacture electronic products. agilent offers open connectivity for a broad range of system-ready instruments, open industry software, pc-standard i/o and global support, which are combined to more easily integrate test system development. agilent direc t remove all doubt our repair and calibration services will get your equipment back to you, performing like new, when promised. you will get full value out of your agilent equipment throughout its lifetime. your equipment will be serviced by agilent- trained technicians using the latest factory calibration procedures, automated repair diagnostics and genuine parts. you will always have the utmost confidence in your measurements. agilent offers a wide range of additional expert test and measurement services for your equipment, including initial start-up assistance, onsite education and training, as well as design, system integration, and project management. for more information on repair and calibration services, go to: www.agilent.com/find/removealldoubt www.agilent.com www.agilent.com/find/pnal for more information on agilent technologies products, applications or services, please contact your local agilent office. the complete list is available at: www.agilent.com/find/contactus americas canada (877) 894-4414 latin america 305 269 7500 united states (800) 829-4444 asia pacific australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 112 929 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 thailand 1 800 226 008 europe & middle east austria 01 36027 71571 belgium 32 (0) 2 404 93 40 denmark 45 70 13 15 15 finland 358 (0) 10 855 2100 france 0825 010 700* *0.125 /minute germany 07031 464 6333 ireland 1890 924 204 israel 972-3-9288-504/544 italy 39 02 92 60 8484 netherlands 31 (0) 20 547 2111 spain 34 (91) 631 3300 sweden 0200-88 22 55 switzerland 0800 80 53 53 united kingdom 44 (0) 118 9276201 other european countries: www.agilent.com/find/contactus revised: march 24, 2009 product speci? cations and descriptions in this document subject to change without notice. ? agilent technologies, inc. 2008, 2009 printed in usa, may 4, 2009 5989-0514en |
Price & Availability of N5230A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |